Multi-turn wave spring carbon steel Product Center

Introduction to wave spring

Wave spring, also known as wave spring, is a thin annular elastic metal component consisting of several wave crests and wave troughs. This product is made of high-quality spring steel 65Mn (60Si2MnA/50CrVA/0Cr17Ni7Al/SUS304), which is heat-treated by specific methods and has a hardness generally controlled between HRC44-55. The surface is blackened and has good elasticity. Wave springs are widely used in motor, textile machinery, hydraulic equipment, automobile and other industries. They are mainly installed in the bearing chamber or hole with appropriate specifications, with a small installation space, and have the special function of reducing noise and vibration.
Surface treatment
(1) Blackening: This surface treatment provides a black surface, and blackening is for appearance and beauty rather than corrosion resistance.
(2) Chrome plating: Chrome plating is mainly a treatment method for carbon steel products, aiming mainly to increase corrosion resistance.
(3) Oil immersion: Oil immersion is a standard treatment method for carbon steel products, aiming to prevent rust during transportation and storage.
(4) Passivation: Passivation is a cleaning method for stainless steel materials.
(5) Phosphate coating: Phosphating has better corrosion resistance than blackening.
(6) Ultrasonic cleaning: This is a standard surface treatment method for stainless steel materials.
(7) Vibration deburring: To eliminate sharp edges of the product.